2001 crown vic rear defrost

Home / the12volt's Install Bay / Car Security and Convenience / 2001 crown vic rear defrost (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nessus

Member - Posts: 3

Joined: December 27, 2009

Posted: December 28, 2009 at 4:43 PM / IP Logged

Hi I have an 2001 Crown Vic ex police car and had a Viper 5901 installed by the dealer. The dealer did not install the trunk release (the form here helped me find the correct wire and the wiring for the relay) and the defrost. I live in Canada and would like the defrost to work. Can someone help me with the wire color and its location and if a relay is need? Also if the wire needs to be cut?

Thanks in advance

Nessus

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: December 28, 2009 at 6:03 PM / IP Logged

TRNK/HTCH RELEASE|purple / YELLOW |5wi|drivers door harness

Says five wire so you need a single pole double throw relay wired like this

Pin87 and 86- twelve volts fused at ten amps

Pin 85- To the negative trigger from alarm

Pin 87@ - Cut the purple / YELLOW and connect the side from the switch here

Pin 30 - To the side of the wire that goes to the solenoid.

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

nessus

Member - Posts: 3

Joined: December 27, 2009

Posted: December 28, 2009 at 6:20 PM / IP Logged

That works perfect. Do you know how to do the defrost?

Nessus

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: December 28, 2009 at 8:46 PM / IP Logged

What do you mean how? I just described it above, the negative trigger is the blue/white status out from the starter!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 28, 2009 at 9:03 PM / IP Logged

I think he is asking for a wire color for the defrost wire.

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: December 28, 2009 at 10:41 PM / IP Logged

it is blue/orange at the switch no relay required -1 sec pulse needed to turn defrost on

Back to Top

nessus

Member - Posts: 3

Joined: December 27, 2009

Posted: December 30, 2009 at 11:23 AM / IP Logged

Thanks that worked. This is a great help.

Nessus

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 crown vic rear defrost

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.