the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 gmc sierra

Home / the12volt's Install Bay / Car Security and Convenience / 2008 gmc sierra (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
pipes15 
Member - Posts: 45
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 23, 2007
Location: Illinois, United States
Posted: January 03, 2010 at 11:53 AM / IP Logged  
Hello everyone.  I have a 2008 GMC sierra and  want to install a  remote starter on it.  I have a autopage rs603 and the bypass module is a dlpk.  My tech sheets say I dont' hook up the start wire?  In addition how hard is it to install and wire up the dlpk to this truck?  any help would be great.  My rs unit says it has "GM no start wire timing"  anyone know what that means?.  anyways thanks again.
pipes
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 03, 2010 at 11:57 AM / IP Logged  
That truck is very easy to do ( IMO ) but I use the iDatalink module that takes care of everything including the convenience features ( lock, unlock ,door sense, hood, etc ). Not familiar with the DLPK and it's functions, but the truck itself doesn use a starter wire at the ignition switch.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
pipes15 
Member - Posts: 45
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 23, 2007
Location: Illinois, United States
Posted: January 03, 2010 at 12:38 PM / IP Logged  
what module is that?
pipes
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 03, 2010 at 12:58 PM / IP Logged  
ADS-DL or the ADS-ALCA
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
pipes15 
Member - Posts: 45
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 23, 2007
Location: Illinois, United States
Posted: January 03, 2010 at 1:18 PM / IP Logged  

So I understand you, the start wire from the RS is not used then?  The bypass module does the all the work?  and what is the difference in module you suggested?  thanks again, hope I am not being annoying.

pipes
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 03, 2010 at 2:56 PM / IP Logged  
The main difference between the two modules is that the iDatalink doesn't loose it's programming if the vehicles looses power & it also has RAP shut down. If the DLPK looses power you have to cycle the key to start and it will releasrn the module. The DLPK Is alot like the Fortin CANSL2 ( if not the same module ). I install Compustar PRO systems so the iDatalink is naturally the choice module for me. The module will do all the work for bypass as well as convenience features. This vehicle usually takes about 45 minutes from start to finish with the iDatalink in D2D mode.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
pipes15 
Member - Posts: 45
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 23, 2007
Location: Illinois, United States
Posted: January 03, 2010 at 6:37 PM / IP Logged  

So everytime the vehicle looses power you have to reprogram the module?  that does not sound very convienent.  maybe I will try the idata link route, thanks for all the helpful info.

pipes
robertsc 
Copper - Posts: 337
Copper spacespace
Joined: December 21, 2007
Location: Ontario, Canada
Posted: January 03, 2010 at 7:13 PM / IP Logged  
All is required is starting the vehicle to reprogram it .
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 04, 2010 at 7:52 AM / IP Logged  
Yes, all you have to do is start the vehicle with the key and it reprograms, but if you don't know that the battery is dead in the truck and you try to start the truck, it trips the PK3+ system and locks you out until it resets. I had this happen to various customers of mine when using the CANSL2
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer