viper 5701 two way remote

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701 two way remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vipersport328

Member - Posts: 8

Joined: December 28, 2009

Location: Illinois, United States

Posted: January 05, 2010 at 12:22 PM / IP Logged

Everything is working normally the only thing is after locking or unlocking the doors the red led next to funtion flashes twice and makes a sound. Ive changed the battery several times but still doing the same thing.

Pete

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 05, 2010 at 2:59 PM / IP Logged

pull the fuse for the brain (red wire - 12 pin harness) and wait about 30 seconds and put it back in... this should re-boot the brain.... i've had that happen on a few units now.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5701 two way remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.