the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

thor motorcycle alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
nite 
Member - Posts: 5
Member spacespace
Joined: January 13, 2010
Location: Ontario, Canada
Posted: January 13, 2010 at 11:38 PM / IP Logged  
hey guys, i found this forum while googling around, finally a place where i cant talk about electronics!
anyways i own a 2003 yamaha r1 and i purchased a Thor motorcycle alarm pics below
the alarm works fine, i have the sirens working, but my problem is that i need to hook up the remote starter, and this is my concern, also i need to hook up the lights, so when the bike arms it will flicker the turn signals, i know if i hook up to one signal light it will only flash that one and not all 6 of them.
does anyone know how to hook the bike up so the remote starter works?
thank you
thor motorcycle alarm - Last Post -- posted image.
thor motorcycle alarm - Last Post -- posted image.
nite 
Member - Posts: 5
Member spacespace
Joined: January 13, 2010
Location: Ontario, Canada
Posted: January 13, 2010 at 11:42 PM / IP Logged  
sorry i did not realize i cannot edit my posts, this is the image i ment to post but accidently hit enter, sorry again i am on my netbook in the dark and cannot see properly lol
thor motorcycle alarm - Last Post -- posted image.
http://www.hsalarms.com/wiring.php thats the diagram i saw on a previous post btw
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: January 14, 2010 at 10:12 PM / IP Logged  
What remote start circuit are you using?
The remote start in the diagram is for sensing only (to disable the alarm - at least so I assume) - not for issuing a start signal.
nite 
Member - Posts: 5
Member spacespace
Joined: January 13, 2010
Location: Ontario, Canada
Posted: January 14, 2010 at 10:38 PM / IP Logged  
what do you mean by that? this is all it came with, the ridiculous instructions, i can provide a schematic diagram for my bike, that i can take from the repair manual if that helps?
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: January 15, 2010 at 5:51 AM / IP Logged  
Sorry - I interpreted that you wanted to start it remotely.
Maybe that is the intention, but without neutral sensing, I'll bug out anyhow.
nite 
Member - Posts: 5
Member spacespace
Joined: January 13, 2010
Location: Ontario, Canada
Posted: January 16, 2010 at 11:14 AM / IP Logged  
yes the bike will not start without it being in neutral, i wanted to start it remotely thats all
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: January 17, 2010 at 3:13 AM / IP Logged  
So you connect the alarm's blue "connect to starter" wire to the starter wire (from the handlebar switch, or the relay that controls the starter-motor).
I presume the alarm will switch a relay only - not the starter-motor's solenoid. Check your wiring diag for a relay (not to be confused with the integral starter-motor solenoid if fitted), else check the supply capability of the alarm, though it looks like a few Amps if that - not enough for a starter motor nor its solenoid direct.
nite 
Member - Posts: 5
Member spacespace
Joined: January 13, 2010
Location: Ontario, Canada
Posted: January 24, 2010 at 3:25 PM / IP Logged  
sorry for the late reply, so for the turn signals i would hook the wires to the handlebar switches right? because they turn the signals?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer