hid fog problem '06 x5 3.0i

After I wired everything up the.... DDM Digital HID's turned on. Relay from the wiring harness started buzzing. I replaced the relay and buzzing stopped for the time being. Edit: Constant clicking from the relay is back... Check fog lamps still comes up on the display. Did I go wrong somewhere? Driver side: Passenger side:

Update: I removed the relay harness and installed the hid's again. Everything works as normal. No BOW light. No flickering that I can see during the day. I'll check again at night. Any ideas on what the problem is when I use a relay harness? I definitely don't want to use the fogs without a failsafe. I replaced the relay with new ones twice. The ground is located at the factory NEG bolt used to jump start.

your vehicle is all can-bus related and you need to make sure your kit can handle the can-bus signalLiquid Audio Styling & Sound Ltd.

Red Deer, AB, Canada

403-352-2224