avistart 4103

Home / the12volt's Install Bay / Car Security and Convenience / avistart 4103 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

chev104275

Gold - Posts: 1,436

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 17, 2010 at 8:14 PM / IP Logged

you may be able to get away with just using the 2 ing 1 acc but i power up everything at the ing harness just try to avoid problems

as far as the bitwriter as i said in a previous post you don't need the bitwriter but it does make it a little easier

If i Can't Install it I Don't need it Joe

c_frank2

Member - Posts: 13

Joined: January 16, 2010

Location: Florida, United States

Posted: January 17, 2010 at 8:40 PM / IP Logged

I found out about a dei 451m module instead of using relays, i just ordered one. Did i need two of those modules or would one module work in place of the two relays?

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: January 19, 2010 at 7:55 AM / IP Logged

one will work in place of two relays. instructions are on the back of the 451

c_frank2

Member - Posts: 13

Joined: January 16, 2010

Location: Florida, United States

Posted: January 21, 2010 at 4:56 PM / IP Logged

are there any factory relays in place for the powers locks that i need to do anything with or should i just install the dei module?

c_frank2

Member - Posts: 13

Joined: January 16, 2010

Location: Florida, United States

Posted: January 21, 2010 at 9:38 PM / IP Logged

Also, how would i wire up the relay for the second ignition wire? I have searched the forums and found nothing on that.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avistart 4103

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.