no access to programming mode?

Home / the12volt's Install Bay / Car Security and Convenience / no access to programming mode? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

symon steele

Member - Posts: 8

Joined: January 06, 2010

Location: New Mexico, United States

Posted: January 18, 2010 at 11:12 AM / IP Logged

I have tha majority of the alarm installed and working, but some of the features i want need to be programmed, I am putting a viper 3002 on my 99 f250 sd diesel, i would like to setup the passive arming. Although when i try to enter the progamming mode, nothing happens, no chirps no nothing?? Is there something i am missing in the instuctions? I am hoping someone has some experiance with this unit and can help me figure this out!

Back to Top

phat-focus

Member - Posts: 19

Joined: November 01, 2009

Location: Illinois, United States

Posted: January 18, 2010 at 12:00 PM / IP Logged

Did you hook up the green or purple door pin wires? If so, are you opening the door before you turn the ignition on? Also, make sure you have your ignition from the alarm hooked up to the correct ignition on the truck, RED / grn I believe

Driversphere.com

Plainfield/Joliet Illinois.

Flatline till I Flatline

Back to Top

symon steele

Member - Posts: 8

Joined: January 06, 2010

Location: New Mexico, United States

Posted: January 19, 2010 at 9:47 AM / IP Logged

yes i have the green door wire hooked up , also have the constant power hooked up to the red and black , do not see a red and green under the dash, as the instructions say, open the door , turn on then off the ignition press and hold the valet switch. I have tried everything i can think of, maybe i got a bad unit??

Back to Top

symon steele

Member - Posts: 8

Joined: January 06, 2010

Location: New Mexico, United States

Posted: January 19, 2010 at 9:49 AM / IP Logged

I guess i am not allowed to see other parts of this site, I am after all a do it yourselfer :)

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 19, 2010 at 3:31 PM / IP Logged

Do you have ignition hooked up? Is the siren hooked up? You have constant power hooked to red and black? Clarify!

Try grounding the green wire whilst programing!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no access to programming mode?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.