2010 traverse remote start delay

Home / the12volt's Install Bay / Car Security and Convenience / 2010 traverse remote start delay (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pjk485

Member - Posts: 11

Joined: January 28, 2010

Location: Louisiana, United States

Posted: January 28, 2010 at 7:50 PM / IP Logged

I just installed an Autopage RS-730 remote start with a DLPK. Everything works fine except that it takes 15-20 seconds for the car to remote start. The ignition powers on then 15-20 seconds later it starts. It starts fine, doesn't die after starting, does remote takeover just fine. I don't know what it could be. I talked to DEI and the tech didn't seem to think it was a problem. Any ideas?

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 28, 2010 at 8:12 PM / IP Logged

i think you have autopage programmed for diesel. the pause time is for the glow plugs to heat up on diesels.

default the unit and program what you need.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

pjk485

Member - Posts: 11

Joined: January 28, 2010

Location: Louisiana, United States

Posted: January 28, 2010 at 8:27 PM / IP Logged

No that is the first thing i checked haha.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 28, 2010 at 8:41 PM / IP Logged

Funny, i have noticed odd delays on some GM remote starts i have done recently and one was a Traverse. I use Idatalink and the delay was a little longer than usual but not as long as you. I also have noticed a lot of shutdown delays too. I can press the brake and count to 3 before it shuts off.

I know this doesn't help any but i thought it was odd...

Mike M2

Tech Manager

CS Dealer Services

Back to Top

pjk485

Member - Posts: 11

Joined: January 28, 2010

Location: Louisiana, United States

Posted: January 28, 2010 at 8:59 PM / IP Logged

Yea i don't know what it is. I don't have the problem with the shutdown just the start. Does the Idatalink give you a brake output? That could be where the shutdown delay is coming from.

Back to Top

jperez_jr_

Member - Posts: 10

Joined: February 12, 2007

Location: United States

Posted: August 09, 2010 at 4:36 PM / IP Logged

I had this problem with some GM's too. Make you the correct ACC wire is getting powered directly from the RS and just not the bypass module.

Jorge Perez

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 09, 2010 at 6:34 PM / IP Logged

Was this wired W2W or D2D?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 traverse remote start delay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.