cone area vs box design

Home / the12volt's Install Bay / Car Audio / cone area vs box design (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: February 01, 2010 at 2:28 AM / IP Logged

If you intend to compete then the (2) 12s would have a slight advantage on a mic, but you would not be able to hear the difference in loudness.

This is assuming both enclosure are of optimal size, design, placement and tune for each. If you don't have optimal space for the (2) 12s and the (1) 15 was in an optimal enclosure. The 15 could easily be louder.

cone area vs box design - Page 2 -- posted image.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cone area vs box design

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.