Avalanche stock stereo Help

Home / the12volt's Install Bay / Car Audio / Avalanche stock stereo Help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

JaredSimpson

Member - Posts: 2

Joined: December 18, 2002

Location: United States

Posted: April 09, 2003 at 6:15 PM / IP Logged

I recently installed an Arc Audio Kar series amplifire into a 2003 Avalanche(I used the amps high level inputs) and all was well then nothing no sound at all all I hear is a quiet thunk when I turn the volume all the way down can anyone help thanks PS the amp is pushing 4 Arc Audio 12" woofers

Back to Top

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: April 10, 2003 at 9:45 AM / IP Logged

Where are you getting the input signal from?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 10, 2003 at 7:58 PM / IP Logged

Where are you getting the remote turn on lead from ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

mark241

Copper - Posts: 101

Joined: March 23, 2003

Posted: April 18, 2003 at 6:53 PM / IP Logged

You may need to try using a high to low level converter and then connect through RCA. I had a similar problem with the original head unit, new amp, with engine noise that increased as you reved up in an 03' Avalanche. Your problem may be different however, the converter solved the problem in out case.

Back to Top

dyer

Copper - Posts: 206

Joined: May 24, 2002

Location: United States

Posted: May 17, 2003 at 9:06 AM / IP Logged

I have a 4-ch rf modulator hooked up to my rear speakers and everything works beautifully!

Dyer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Avalanche stock stereo Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.