viper 5701 build in relays?

All the relays are inside the brain...Most units even have a wire for 2nd starter.Acc,Ign...So 10 relays are not required anymore...So Yes...You shouldnt need any relays for the ignition connection(unless no 2nd starter 12v output...or there is just a negative one and need to convert polarity)...I am not real familiar with that unit...So if there is not a wire for 2nd starter...you will probably need to add a relay off the starter wire for the 2nd starter...

Battery		BLACK		(+)		AT IGNITION SWITCH
	Ignition 1		PINK		(+)		AT IGNITION SWITCH (20 GAUGE)
	Ignition 2		YELLOW		(+)		AT IGNITION SWITCH (12 GAUGE)
	Accessory 1		WHITE		(+)		AT IGNITION SWITCH (18 GAUGE)
	Starter 1		BLUE		(+)		AT IGNITION SWITCH (10 GAUGE)
	Starter 2		GRAY		(+)		AT IGNITION SWITCH (18 GAUGE)
	Anti-Theft Type		UNIVERSAL IMMOBILIZER
	Anti-Theft Descript		THE KEY SENDS AN RF SIGNAL TO THE BCM VIA AN ANTENNA RING LOCATED AROUND THE KEY CYLINDER
	Key Sense		BLUE		(-)		AT SWITCH OR BODY ECU 10 PIN PLUG PIN 5
	Tachometer		UNCOMMON COLOR		(AC)		AT INJECTOR OR COIL
	Speed Sense		VIOLET		(AC)		AT ENGINE CONTROL MODULE
	Parking Lights		GREEN		(+)		FRONT OF FUSEBOX
	Low Crr. Pk Lights		BLACK		(-)		AT SWITCH OR BODY ECU 26 PIN PLUG PIN 23
	Brake Lights		BLUE		(+)		AT SWITCH
	Reverse Lights		RED		(+)		AT NAVIGATION RECEIVER BELOW RADIO OR DRIVER KICK
	Horn		BLACK		(-)		AT COLUMN OR BODY ECU (WIRE MAY BE WHITE AT COLUMN)