the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Subwoofer box questions.


Post ReplyPost New Topic
< Prev Topic Next Topic >
Edicius 
Copper - Posts: 90
Copper spacespace
Joined: March 11, 2003
Location: Georgia, United States
Posted: April 11, 2003 at 12:58 PM / IP Logged  

If my sub says it needs a certain box size, how important is it that it be exactly that size. Also, I've seen boxes made out of different thicknesses, is thicker better?

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 11, 2003 at 1:15 PM / IP Logged  

The size of the enclosure is very important. Especially if your using a ported/vented enclosure. As far as the thickness goes don’t use anything less than 5/8 but I would recommend 3/4. But the thickness also depends upon the size and application of the enclosure. You can read more on the importance of the proper size enclosure here https://www.the12volt.com/caraudio/boxes.asp

Edicius 
Copper - Posts: 90
Copper spacespace
Joined: March 11, 2003
Location: Georgia, United States
Posted: April 11, 2003 at 1:34 PM / IP Logged  
So, I have a sub that the recommended size is 1.00.  I am buying a cheap box off of ebay untill I save up for a custom made box.  There are two boxes on ebay that I am looking at...one is 3/4 but is 1.25...the other is 5/8 and is 1.00.  Would I be better to by the 3/4 at 1.25 or the 5/8 1.00?
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 11, 2003 at 1:52 PM / IP Logged  

Either one will work. But if it’s a temp box I would go with the 5/8. If it’s a sealed enclosure which it sounds like it is not as sensitive when it comes to volume. You could go with 1.25 but I would not go any larger than that.

Edicius 
Copper - Posts: 90
Copper spacespace
Joined: March 11, 2003
Location: Georgia, United States
Posted: April 11, 2003 at 1:57 PM / IP Logged  
It is a sealed box.  which is more important, the size or the thickness?
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 11, 2003 at 2:10 PM / IP Logged  

In my Experience with Audiobahn woofers 1.0 sounds the best. When using a sealed enclosure the volume can be +or- the recommended volume a little bit. In an enclosure that small there will not be any benefit to 3/4 over 5/8 so I would suggest the 1.0 / 5/8

Edicius 
Copper - Posts: 90
Copper spacespace
Joined: March 11, 2003
Location: Georgia, United States
Posted: April 11, 2003 at 3:49 PM / IP Logged  
Thanks, but it is a rockford fosgate power hx2 RFR3112 sub.
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 11, 2003 at 4:31 PM / IP Logged  

Sorry but I would still suggest the 1.0 for that sub

Edicius 
Copper - Posts: 90
Copper spacespace
Joined: March 11, 2003
Location: Georgia, United States
Posted: April 11, 2003 at 5:05 PM / IP Logged  
Ok Thanks
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 11, 2003 at 5:11 PM / IP Logged  

Your welcome, Good luck with the setup

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer