2002 pontiac grand prix gtp remote strart

Home / the12volt's Install Bay / Car Security and Convenience / 2002 pontiac grand prix gtp remote strart (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

gregbbb

Copper - Posts: 82

Joined: February 22, 2008

Location: Minnesota, United States

Posted: March 14, 2010 at 8:38 PM / IP Logged

I am installing a viper 5901 in a 2002 grand prix GTP so far I found the locks in the kick panel I just cant find the door triggers I probed every tan on the driver side in the convince center and no luck they are all ground before the door is opened can any one tell me where to find then?

Thanks

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 14, 2010 at 10:14 PM / IP Logged

the door trigger wire is in the same loom as the lock/unlock wires. It say tan but i say its more of a brown colour.

this will only monitor the driver door. the other wire is Dark blue (-) @ passenger kick panel. Diode isolate both wires. bands towards wire on car.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 14, 2010 at 10:18 PM / IP Logged

if you cant find it, another location is the keyless module left of the brake pedal. this is a black box with 3 plugs. 1 black and 2 blue connectors.

the blue connector at the end will have your door trigger wire.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

gregbbb

Copper - Posts: 82

Joined: February 22, 2008

Location: Minnesota, United States

Posted: March 16, 2010 at 11:03 AM / IP Logged

How do you test for a door trigger?

I just set my meter to continuity (OHM) touch one probe to the car and probe the suspect wire does the light have to go off door is closed too get a proper reading? It should go to ground when the door is opened right?

Thanks

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 16, 2010 at 8:42 PM / IP Logged

set dmm to 20DCV, red to constant 12v, black to wire you are testing. open door and it should read 12-14v.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

gregbbb

Copper - Posts: 82

Joined: February 22, 2008

Location: Minnesota, United States

Posted: March 19, 2010 at 12:17 AM / IP Logged

Oh and can you please tell me where the tach wire is on this car, all the wire diagrams are not the same.

Thanks

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 19, 2010 at 6:20 AM / IP Logged

on top of the engine there is a black 3 pin plug. the TAN wire is hwa tyou want.

its very easy to get to. its towards the back of the engine, but topside.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

gregbbb

Copper - Posts: 82

Joined: February 22, 2008

Location: Minnesota, United States

Posted: April 03, 2010 at 12:06 AM / IP Logged

I finally got some time to look at my car and I still cant find that tach wire the only 3 pin plug I found with tan in it go's to the o2 senor.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: April 03, 2010 at 6:11 PM / IP Logged

not sure how you can really miss it. its literally on top of the engine and its a 3 pin plug.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

gregbbb

Copper - Posts: 82

Joined: February 22, 2008

Location: Minnesota, United States

Posted: April 04, 2010 at 12:46 PM / IP Logged

Hey

One more question for you I can’t make up my mind on where to put the brain

On this car there is not much room under the dash I usually put them in the kick

But that would way easy to see on this car then I thought that hollow spot with the

Cover on the driver side but I don’t think it will fit in there the only pace I see

Is in the front of the console what would you do?

Thanks!!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.