bass knob

Home / the12volt's Install Bay / Car Audio / bass knob (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

knotdrummer88

Copper - Posts: 162

Joined: January 30, 2010

Location: Ohio, United States

Posted: March 30, 2010 at 2:39 PM / IP Logged

im trying to run a bass know to my amp in a 1993 grand am. to do this will i need to take out the backseat, cause right now its looking that way, and how do i take out the back seat?

Back to Top

ianarian

Copper - Posts: 516

Joined: April 24, 2009

Location: California, United States

Posted: March 30, 2010 at 2:53 PM / IP Logged

How is everything else ran there? If you do a temp tuck from view with that one wire, and that one only, then if the amp ever takes a dump, that knob may not fit the new one. Happened to me with Memphis before. The knob wasnt universal in my case. There has to be a release latch somewhere for the seat though.

This is what I do for FUN!

Back to Top

knotdrummer88

Copper - Posts: 162

Joined: January 30, 2010

Location: Ohio, United States

Posted: March 30, 2010 at 3:28 PM / IP Logged

well i tried running it under the plastic part that sits on the door frame into the part under the window mext to the seat, but couldnt run it through and couldnt see it at the ohter end but i dont know what got in my way

Back to Top

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: March 30, 2010 at 9:55 PM / IP Logged

Could get a PAC-LC1. Its an rca knob. disconnect the rca's from the deck and put it to line out on the knob and run a new short rca from deck to the knob in. Might be easier and only have to run a short rca to where you want the knob, also would be universal to any amplifier if you ever switched.

Back to Top

knotdrummer88

Copper - Posts: 162

Joined: January 30, 2010

Location: Ohio, United States

Posted: March 30, 2010 at 10:23 PM / IP Logged

welll i just tookthe seat out and for now ran in under the seat then out to next to my seat later ill go under the carpet and come up upder my seat, so no wires!

Back to Top

ianarian

Copper - Posts: 516

Joined: April 24, 2009

Location: California, United States

Posted: March 31, 2010 at 12:46 AM / IP Logged

Sorry Knot, I asked around a little bit, but could not get the mental picture of what exactly you were faced with.

This is what I do for FUN!

Back to Top

knotdrummer88

Copper - Posts: 162

Joined: January 30, 2010

Location: Ohio, United States

Posted: March 31, 2010 at 10:00 AM / IP Logged

well i ended up gettin it out and running the wire puttin the seat back all fine and everything, but thanks anyway

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bass knob

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.