correct voltage regulator

Home / the12volt's Install Bay / General Discussion / correct voltage regulator (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jasonb61

Copper - Posts: 81

Joined: December 01, 2004

Location: United States

Posted: April 06, 2010 at 7:45 PM / IP Logged

Ok, fairly simple but I need to make sure I'm on the right path.

I have the power supply for my monitor on a relay so it gets a ground connection when the head unit is powered on.

This works well, but the relay I used says "Nominal Coil Voltage: 9v" and I'm worried it will burn out over time and I want to save myself the hassle and use a VR to drop the 12v across the coil, down to 9v or so. Can I use the 78L09? It's rated at 100mA though.. not sure if that will work or not.

I'm not sure how many amperes my monitor pulls but it is a Lilliput 809GL-80NP/C/T VGA Touch Screen.

NOTE: The relay I am using is on a circuit board with other audio-related stuff and is NOT a standard auto relay.. that's why it's the 9v one. It's one of the small blue ones from radio shack.."OEG - SRUDH-SS-109L"

sorry if this is a little confusing lol

Thanks,

-Jason

Back to Top

anonymous1

Copper - Posts: 151

Joined: October 25, 2009

Location: Washington, United States

Posted: April 06, 2010 at 8:38 PM / IP Logged

Off the cuff I would say that the 9v reference means you need at least 9v to pull the contacts in, and 12v would probably be just fine forever.

Secondly, if you were goung to spend the money for a regulator, why not just buy a cheap 12v relay from Radio Shack or an auto parts store and be done with it?

There probably really isnt going to be any difference that you'll ever see, but you'll sleep better at night knowing that you spent $10 doing something proactive.

Back to Top

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: April 06, 2010 at 10:17 PM / IP Logged

hi,

do the specs for the relay show a coil resistance? or measure the resistance with an ohmmeter.

add a resistor one third of the vlue of the coil resistance in series with the coil.

you'll probably need a resistor rated at one watt (for safety).

you can use ohms law to check power consumed by the added resistor.

m

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

correct voltage regulator

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.