help with push button ignition

Home / the12volt's Install Bay / Relays / help with push button ignition (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rampitcher31

Member - Posts: 2

Joined: April 12, 2003

Location: United States

Posted: April 12, 2003 at 6:48 PM / IP Logged

I have a 2001 Dodge Ram. I have and want to install a push button ignition. I have a 40a relay. I need help with the wiring of the relay and the button. I found a diagram that says I have an ignition 1 and an ignition 2, what do I have to do with these. I know where the starter wire is and have a general idea. I need to find a 12v power source, and a 12v source when the key is in the run or start position. If it helps the button is an ignited illuminated. So basically I have no experience with relays, and need a pretty detailed description of how to wire the button. Any help will be appreciated.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 12, 2003 at 7:14 PM / IP Logged

Do you mean push button START ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

rampitcher31

Member - Posts: 2

Joined: April 12, 2003

Location: United States

Posted: April 12, 2003 at 7:31 PM / IP Logged

Yes, push start.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 12, 2003 at 8:51 PM / IP Logged

30: motor side of starter wire
87a: switch side of motor wire
85: ground
86 : one side of the contact on the push button itself ( the other contact will go to a 12 volt source switched )
87 : NOT USED

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

help with push button ignition

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.