the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 ford edge rearview camera issue


Post ReplyPost New Topic
< Prev Topic Next Topic >
Ynot80 
Member - Posts: 33
Member spacespace
Joined: June 12, 2005
Location: United States
Posted: April 19, 2010 at 9:26 PM / IP Logged  
Im installing a rearview carmera and rearview mirror with a screen to view the camera in a 2010 Edge . I had everything working I thought till I started the vehicle up . If I have the engine running I loose my video from the camera . If the engine is off and the key is on it all works fine . Im assuming I have something hooked up wrong but I cant figure out what . I know the mirror is made by Advent and is model # LCDM42 . I dont know the info on the camera . The install instructions that came with it werent the best so I did my best to figure which wires needed what . I have my signal from the reverse light run right from the rear reverse light and for my main power for things I was using the WHITE/ Orange ignition wire in the factory ignition switch harness .  Any info would be great. This issue has me going nuts cause I know its something simple Im missing
Ynot80 
Member - Posts: 33
Member spacespace
Joined: June 12, 2005
Location: United States
Posted: April 19, 2010 at 9:28 PM / IP Logged  
I forgot to mention it only happens when the vehicle is running and I shift into reverse . If the engine is off and the key is on it works fine when I shift into reverse
Velocity Motors 
Moderator - Posts: 12,487
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 21, 2010 at 7:10 AM / IP Logged  
Where did you ground the system ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, September 20, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer