96 blazer light problem

Home / the12volt's Install Bay / Car Security and Convenience / 96 blazer light problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lynnboy021

Copper - Posts: 66

Joined: March 17, 2010

Location: Massachusetts, United States

Posted: May 03, 2010 at 7:39 PM / IP Logged

ok i installed a new battery and when i close the boors or open the lift gate glass or start the car, all the light start flashing. i thougt i had an alerm system but i looked it up and the truck does not have any kind of alerm system.

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: May 03, 2010 at 9:05 PM / IP Logged

Look under the drivers side of the dash. There must be some type of aftermarket system installed. Maybe you can find the override switch or pushbutton.

Back to Top

lynnboy021

Copper - Posts: 66

Joined: March 17, 2010

Location: Massachusetts, United States

Posted: May 03, 2010 at 11:28 PM / IP Logged

ya i was looking every where but cant find one

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: May 04, 2010 at 11:49 AM / IP Logged

If it's all quiet, can you hear the relay clicking, can you locate the relay?

Did you remove the underdash panel on the drivers side?

Back to Top

lynnboy021

Copper - Posts: 66

Joined: March 17, 2010

Location: Massachusetts, United States

Posted: May 04, 2010 at 2:09 PM / IP Logged

thanks guys all set it was a lose wire for the lights touching the ground

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 blazer light problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.