the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

65 mustang door lock actuator


Post ReplyPost New Topic
< Prev Topic Next Topic >
rallysport 
Copper - Posts: 172
Copper spacespace
Joined: April 10, 2004
Location: United States
Posted: May 08, 2010 at 6:14 PM / IP Logged  
Im trying to install some aftermarket actuators into a first gen mustang. Any pics or advice? Im not sure how to go about mounting the actuators. There is space for an easy install right next to the latch inside the door however the interior door panel would not cover the mounting screws since the panel only covers about 2/3 of the door. ideas?
heres a quick ms paint of whats going on, it would be easy to install the actuator inline with the lock rod but the door panel only covers the brown area.
65 mustang door lock actuator -- posted image.
jim hunter 
Silver - Posts: 351
Silver spacespace
Joined: March 23, 2006
Location: United States
Posted: May 09, 2010 at 10:07 AM / IP Logged  
you can bend the rods in a way so that the actuator can be installed using the supplied bracket behind the door actuator, or turn the actuator so thatthe screws would be on the striker side of the door frame as many factory lock actuators are riveted in the striker side, just keep it neat and use good quality screws
Mark Mizenko 
Copper - Posts: 460
Copper spacespace
Joined: October 13, 2004
Location: Pennsylvania, United States
Posted: May 09, 2010 at 2:49 PM / IP Logged  
Use a heavy gauge metal bracketing, NOT backstrap material,  and you can attach it behind the panel, but position it by the rods.
phil6710 
Copper - Posts: 89
Copper spacespace
Joined: September 04, 2009
Location: New York, United States
Posted: May 11, 2010 at 8:35 PM / IP Logged  
you could use a two part epoxy like Speed Grip to glue mounting brackets to the inside of the door.  Then you could mount the actuators where you want with out drilling holes or having exposed  screws or rivits.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, December 1, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer