the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 kia forte speaker wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: May 20, 2010 at 8:24 AM / IP Logged  
wondering if anyone knows the speaker wires off the back of the deck for a 2010 kia forte? not sure if it matters but i've got the sterring wheel controls as well.
Tri County KustomZ
certified installer
dashrat77 
Member - Posts: 25
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 23, 2003
Location: Colorado, United States
Posted: May 20, 2010 at 11:55 AM / IP Logged  
  • 12v - red - gray 8 pin plug, pin 4
  • ground - black - gray 8 pin plug, pin 8
  • ignition - yellow  -gray 8 pin plug, pin 6
  • illumination - pink (pk lgts), gray (dim) - gray 8 pin plug, pins 2 & 7
  • pwr ant - yellow/orange - gray 8 pin plug, pin 3
  • LF spkr (+,-) - white, black - brown 8 pin plug, pins 3 & 7 
  • RF spkr (+,-) - yellow, black - brown 8 pin plug, pins 2 & 6
  • LR spkr (+,-) - red, blue - brown 8 pin plug, pins 4 & 8
  • RR spkr (+,-) red, blue - brown 8 pin plug, pins 1 & 5
  • Aux audio in Left (+,-) white, black (common) - green 6 pin plug, pins 2 & 3
  • Aux audio in Right (+,-) yellow, black (common) - green 6 pin plug, pins 1 & 3

I have not verified this info so please test wires before use.

dasbogie 
Silver - Posts: 514
Silver spacespace
Joined: September 30, 2006
Location: Pennsylvania, United States
Posted: May 20, 2010 at 3:29 PM / IP Logged  
just did this car the other day.  you should be able to find them in the door sill or kick panel.  I got mine in the passenger door sill and plenty of room to tuck the l.o.c.  The one I did was a koupe though.
Advanced
stang351w 
Silver - Posts: 350
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: May 20, 2010 at 7:29 PM / IP Logged  

thatnks...i don't need a LOC..the amps got high level inputs. i will be running RCA's but i'm making some female connectors to tie into the radio and into the amp. just to make it look like i'm running RCA's rather then high level inputs.  all connections will be hidden with the amp rack.

Tri County KustomZ
certified installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer