1989 civic 5901 viper

I think I made a slight error, if your dome light supervision is working, fine if not H1/9 Black white goes through a relay (to boost its 200ma current output) as follows: BLACK/ white H1/9 to 85. Constant 12V+ 5amp fused to 86. Good ground to 30. Join to H1/8 green at 87. 1N4004 diode across 85 and 86, band towards 86.

I'll check to see if it is working.  If not, it's ok.   I don't need it that bad. 

Can you verify that these connections are ok?  I'm not to sure on the H3/1 and H3/6.

H3 HARNESS

H3/1__Pink___________Ignition 1 Input/Output__________________  Black / YELLOW  H3/2__RED / White______Flex Relay                                                 12v constantH3/3__Orange_________Accessory Output______________________blue/white H3/4__Violet__________Starter Output (Car Side)________________ BLACK/ white H3/5__Green__________Starter Input (Key Side)_________________ BLACK/ white H3/6__Red____________Ignition 1 Input                                           12v constantH3/9__RED / Black_______Accessory/Starter Relay Input                    12v conatant

Thanks again.  Let me know if you have a paypal. 

You are absolutely correct in your last post. Don't be daft, you're 5000 miles too far away to worry about "taking the food from my mouth"

Well, I just wanted to send you a "gift" for all your help. I really appreciate it.