the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hvlp gravity feed


Post ReplyPost New Topic
< Prev Topic Next Topic >
pv13 
Copper - Posts: 147
Copper spacespace
Joined: April 11, 2005
Location: United States
Posted: June 04, 2010 at 6:18 PM / IP Logged  
I have a few questions regarding hvlp spray guns. I currently have a hvlp gravity feed spray gun, and I want to use it to start spraying adhesive on my enclosures.
I have never used the gun before. Are gravity feed guns alright to use with spray grade adhesive? Should I get a different gun? Also, I might eventually start painting little projects, so would I need to get another gun. One for paint and one for adhesive?
I would appreciate any feedback you guys could give me.
Thanks
spmpdr 
Copper - Posts: 456
Copper spacespace
Joined: March 22, 2009
Location: Oregon, United States
Posted: June 09, 2010 at 12:26 AM / IP Logged  
pv13 wrote:
I have a few questions regarding hvlp spray guns. I currently have a hvlp gravity feed spray gun, and I want to use it to start spraying adhesive on my enclosures.
I have never used the gun before. Are gravity feed guns alright to use with spray grade adhesive? Should I get a different gun? Also, I might eventually start painting little projects, so would I need to get another gun. One for paint and one for adhesive?
I would appreciate any feedback you guys could give me.
Thanks
You can use a hvlp gun to spray adhesive but you need one with a huge tip on it like a 2.0 or 2.5 .If you plan on using that gun to spray paint out of later dont spray adhesive through ,get one of those cheap wal mart hvlp with a huge tip on it that should work just fine.
-A vision without a plan is just a hallucination-
pv13 
Copper - Posts: 147
Copper spacespace
Joined: April 11, 2005
Location: United States
Posted: June 09, 2010 at 9:10 PM / IP Logged  
Cool thanks.
jayson33 
Copper - Posts: 165
Copper spacespace
Joined: June 12, 2008
Location: Indiana, United States
Posted: June 16, 2010 at 12:39 AM / IP Logged  
If you are going to paint a car DO NOT USE A CHEAP PAINT GUN. They are poorly made very poor paint atomiziation. And if you clean your gun correct. You can spray adhesive thru it. Use a primer nozzle it will spray fine.
My wife thinks bagging a truck means you kick it in the truck nuts

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, September 27, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer