the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start +a/c


Post ReplyPost New Topic
< Prev Topic Next Topic >
doc0399 
Member - Posts: 7
Member spacespace
Joined: July 18, 2010
Location: Hawaii, United States
Posted: July 18, 2010 at 9:53 PM / IP Logged  

Thanks for the help a head of time.  I have a 2004 Dodge Ram 1500 QC 5.7.  I just installed the Mopar Remote Start system with the upgraded FOB.  I want to know how I can get my AC to turn on when I use the remote start.  It get hot in the truck here in Hawaii wife needs to be cool due to medical condition.

Thanks again DOC

i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 18, 2010 at 10:23 PM / IP Logged  

While under a remote start situation, if you turn the AC control to on, does it not come on? 

Do you have a link to the Mopar installation manual for that remote start unit?

doc0399 
Member - Posts: 7
Member spacespace
Joined: July 18, 2010
Location: Hawaii, United States
Posted: July 18, 2010 at 10:57 PM / IP Logged  

Question one is light is on and no fan while in remote start fan only comes on when I insert key and turn to run.

I look all over the net and couldnt find a link to that I just installed it yesterday still hae the manual but I never spliced into anything behinde the AC Panel.  I diid a splice for the brake, splice for the tach, splicke for tach harnes power feed, and a splice for the #6 pin of the 6 pin under the stearing wheel on the white 6 pin conector.  Let me know I can scan the manual and send it .

i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 19, 2010 at 2:57 AM / IP Logged  

Did you attach something to each of the following wires?

remote start +a/c -- posted image. Battery RED (+) IGNITION SWITCH HARNESS
remote start +a/c -- posted image. Ignition 1 PINK/WHITE (+) IGNITION SWITCH HARNESS
remote start +a/c -- posted image. Ignition 2 PINK/GREEN (+) IGNITION SWITCH HARNESS
remote start +a/c -- posted image. Accessory 1 BLUE HEATER CONTROLS (+) IGNITION SWITCH HARNESS
remote start +a/c -- posted image. Accessory 2 PINK / YELLOW (+) IGNITION SWITCH HARNESS remote start +a/c -- posted image.
remote start +a/c -- posted image. Starter 1 YELLOW (+) IGNITION SWITCH HARNESS

doc0399 
Member - Posts: 7
Member spacespace
Joined: July 18, 2010
Location: Hawaii, United States
Posted: July 19, 2010 at 1:04 PM / IP Logged  

All splicing other then what I have already stated was done through OE plug in the steering column.  I will scan and turn install manual into picture and post later tonight.

i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 19, 2010 at 9:57 PM / IP Logged  
Did you connect something to every wire in the list I posted?  Did you possibly not connect Ign 2 or Acc 2?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: July 20, 2010 at 2:44 PM / IP Logged  

you are most likely missing any ign or acc.

time to pull out the meter and start testing.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
doc0399 
Member - Posts: 7
Member spacespace
Joined: July 18, 2010
Location: Hawaii, United States
Posted: July 20, 2010 at 11:09 PM / IP Logged  
Not really I will start scanning that manual tonight.  The main conection was and OE plug I have reseated that.  I might have to poke it witha volt meter
doc0399 
Member - Posts: 7
Member spacespace
Joined: July 18, 2010
Location: Hawaii, United States
Posted: July 22, 2010 at 9:30 PM / IP Logged  

well sorry been busy but after alot of research I found it on the net; here is it can someone take a look and tell me what I did wrond or if I need to jump something

http://www.dealershipaccessories.com/stores/pdfs/da25579.pdf

xxunknownxx 
Member - Posts: 43
Member spacespace
Joined: June 24, 2009
Location: Alabama, United States
Posted: July 22, 2010 at 10:10 PM / IP Logged  
If theres more than one pink / YELLOW wire in the ignition harness make sure all of them are powered as accessory.
NOTE *8 On some Full Size Trucks with Climate Control it may be necessary to connect (3) extra Accessory wires (PINK / YELLOW) and the DARK BLUE Accessory #1 to turn on the A/C Compressor
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer