clifford 3.3x

Home / the12volt's Install Bay / Car Security and Convenience / clifford 3.3x (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

04nata

Copper - Posts: 358

Joined: April 22, 2008

Posted: July 19, 2010 at 11:39 AM / IP Logged

I have this alarm in my 04 Sonata and not too long after I got it my LED stopped flashing in the car when armed, I think my daughter got a hold of the remote and started puching buttons.

Does anybody know how to program this so the LED will flash when armed?

2004 Hyundai Sonata

Kenwood KDC-X599 HU

2-Sundown X-18D4

2-SQ Q4500.1

2-SQ Q90.4

1-Massive DBX4

8-Niche 5.25 mids

8-Niche Tweeters

4-Skar 8" mid-bass

OhioGen 220a alt

OhioGen 350a alt

156.0

04nata

Copper - Posts: 358

Joined: April 22, 2008

Posted: July 20, 2010 at 1:23 PM / IP Logged

ANYBODY?

2004 Hyundai Sonata

Kenwood KDC-X599 HU

2-Sundown X-18D4

2-SQ Q4500.1

2-SQ Q90.4

1-Massive DBX4

8-Niche 5.25 mids

8-Niche Tweeters

4-Skar 8" mid-bass

OhioGen 220a alt

OhioGen 350a alt

156.0

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: July 20, 2010 at 2:38 PM / IP Logged

check if the system is in valet mode.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

04nata

Copper - Posts: 358

Joined: April 22, 2008

Posted: July 20, 2010 at 2:46 PM / IP Logged

tedmond wrote:

check if the system is in valet mode.

and..................how do I do that sir?

2004 Hyundai Sonata

Kenwood KDC-X599 HU

2-Sundown X-18D4

2-SQ Q4500.1

2-SQ Q90.4

1-Massive DBX4

8-Niche 5.25 mids

8-Niche Tweeters

4-Skar 8" mid-bass

OhioGen 220a alt

OhioGen 350a alt

156.0

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: July 21, 2010 at 5:43 AM / IP Logged

unfortunatly i dont deal with dei stuff too much. best bet is look at the manual.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: July 21, 2010 at 6:33 AM / IP Logged

try pressing the Function button two times then press the Unlock button

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: July 21, 2010 at 5:06 PM / IP Logged

if it was in valet mode the LED would be on constantly....

have you verified that the vehicle is indeed arming? doors locking? could be it's not even arming the unit (accidently switched to car 2 or keypad lock on, etc)

if it is, then i would look at the plugs on the brain to see if it has a separate plug for the LED and switch (small 2 pin blue and white plugs)... verify the white plug with the pink wire is plugged in... this should be for the LED.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

04nata

Copper - Posts: 358

Joined: April 22, 2008

Posted: July 21, 2010 at 5:13 PM / IP Logged

did all that, and everything seems to be plugged in, the LED is part of the antenna/over ride button which is stuck on the inside of the windshield.

2004 Hyundai Sonata

Kenwood KDC-X599 HU

2-Sundown X-18D4

2-SQ Q4500.1

2-SQ Q90.4

1-Massive DBX4

8-Niche 5.25 mids

8-Niche Tweeters

4-Skar 8" mid-bass

OhioGen 220a alt

OhioGen 350a alt

156.0

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: July 23, 2010 at 3:41 PM / IP Logged

and when you hit lock the doors lock? if the small white plug for the LED is plugged into the brain, that would only really leave a bum LED......

the first models had a three piece ant cable... ant and 2 small plugs for the LED and Switch (which were built into the antenna)

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford 3.3x

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.