the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start troubleshooting


Post ReplyPost New Topic
< Prev Topic Next Topic >
southpaw0314 
Member - Posts: 1
Member spacespace
Joined: August 15, 2010
Posted: August 19, 2010 at 10:06 PM / IP Logged  
i have a manual 99 camaro with a viper 5701 installed everything works on the alarm side but i can't figure out what im doing wrong for the remote start. after i try to set it so that i can remote start it it flashes or beeps 7 times. what should i check?
any help is appreciated
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: August 20, 2010 at 6:02 AM / IP Logged  

LED Flashes Shutdown Mode

1 Runtime expired

2 Over-rev shutdown

3 Low or no RPM

4 Transmitter shutdown (or optional push button)

5 (+) Brake shutdown

6 (-) Hood shutdown

7 Timer mode/Turbo mode/Manual mode error *

8 Neutral safety shutdown

9 Low battery (voltage mode)

10 Alarm triggered **

11 Wait-to-start input timed out

*Timer mode error: Ignition is on or shutdown input is active when activating

timer mode.

Turbo mode error: Turbo mode is programmed off, engine is not on or shutdown

input is active.

Manual mode error: MTS mode not enabled.

When all else fails, Read the Instructions
Support the12volt.com Make a Donation
x1le 
Copper - Posts: 171
Copper spacespace
Joined: August 01, 2009
Location: Massachusetts, United States
Posted: August 20, 2010 at 11:21 AM / IP Logged  
for manual transmissions you need the clutch bypassed, along with having the footbrake, e-brake, and tach connected.
If all that is true, you need to put it in the MTS mode by doing this -
while the vehicle is running, hold the foot brake, engage the e-brake, and then release the footbreak. Then hit the remote start button on the remote. You should get a parking light confirmation and the vehicle will stay running after you remove the keys. step out, close the door, and the car will shut down after you hit the lock button. It can now be remote started.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer