Problem with windows...

Home / the12volt's Install Bay / Car Security and Convenience / Problem with windows... (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mr_Kite

Copper - Posts: 70

Joined: April 08, 2003

Location: United States

Posted: April 17, 2003 at 4:44 PM / IP Logged

Well im a newb, and i decided to test my locks. I determined i have neg trigger, but now my windows dont work!

More specifically, only the Driver's side works. I can open/close it, yet i cant open/close any other windows with the set of switches for driver, or the individual swithces at each door......

I am at a loss of how this could have happened.... (I checked the fuses)

Also what is the best way to probe wires with the multimeter? should i slice off a bit of insulation and then tape it up?

Thanks!

x6369x

Copper - Posts: 108

Joined: November 10, 2002

Location: United States

Posted: April 17, 2003 at 6:54 PM / IP Logged

Is there a window shut off switch somewhere? What kind of car?

Friends Don't Let Friends Bump Stock.

Mr_Kite

Copper - Posts: 70

Joined: April 08, 2003

Location: United States

Posted: April 17, 2003 at 9:20 PM / IP Logged

95 Nissian Sentra Its not the safty switch.

Did a few tests before the sun went down....

Its not the motors, cause i can get them going. Could i have shorted out all the switches while probing door locks? Its real odd cause the Front Left window works fine with the switch.

THanks for helpin me out!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Problem with windows...

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.