04 350z alarm, remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 04 350z alarm, remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hardbodys

Copper - Posts: 62

Joined: December 22, 2005

Location: United States

Posted: October 01, 2010 at 6:42 PM / IP Logged

here is were im at now i have taken out a viper 791xv and have put in a viper 5901 and all is well but the remote start will not work with the 791 i had to bypass the clutch and i have a 556U key im in place any ideas ?

hardbodys

Back to Top

hardbodys

Copper - Posts: 62

Joined: December 22, 2005

Location: United States

Posted: October 01, 2010 at 7:14 PM / IP Logged

or dose some one have a more detailed install diagram or how to for the 5901 viper and a 350z

hardbodys

Back to Top

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: October 02, 2010 at 12:29 AM / IP Logged

Define will not work in great detail.

Kevin Pierson

Back to Top

hardbodys

Copper - Posts: 62

Joined: December 22, 2005

Location: United States

Posted: October 02, 2010 at 5:23 PM / IP Logged

after i first installed the 5901 the alarm works :) the door lock unlock works :) and the truck release works :) and when i tried the remote start i got an error on the remote and the lights flashed 7 times :( i then chnged it to auto and i can here the fuel pump activate but no start and error

hardbodys

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 02, 2010 at 5:37 PM / IP Logged

Just leave the ignition key in, then try a remote start and let us know what happens.

Back to Top

hardbodys

Copper - Posts: 62

Joined: December 22, 2005

Location: United States

Posted: October 02, 2010 at 5:51 PM / IP Logged

did that nada :( im rechecking the wireing now :)

hardbodys

Back to Top

scrtcell

Member - Posts: 22

Joined: July 11, 2004

Location: United States

Posted: October 02, 2010 at 6:31 PM / IP Logged

you need to check all your wires try starting with the key first and probing the wires and then the remote starter I am not sure but there could be a second start wire

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 02, 2010 at 6:36 PM / IP Logged

There nearly always is on Nissans, except this one uses a Renault engine, worth checking though there was already a 791 in this car.

Have you programmed tach and checked the R/S outputs? Also is it pulsing the lights with fault code also have you reprogrammed it for auto if you have an auto transmission?

Back to Top

hardbodys

Copper - Posts: 62

Joined: December 22, 2005

Location: United States

Posted: October 02, 2010 at 9:13 PM / IP Logged

i got it all i had to do is use the 2nd starter and change to auto trans and boom :)

hardbodys

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 350z alarm, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.