the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

me make decide which to buy :


Post ReplyPost New Topic
< Prev Topic Next Topic >
accordexxx 
Member - Posts: 38
Member spacespace
Joined: February 24, 2010
Location: Ontario, Canada
Posted: November 13, 2010 at 3:55 PM / IP Logged  
Hey guys,
I need your help in deciding on what to purchase in redoing my car audio system.
I want to do my research and make an informative decision before I shell out any money and I want to do this right the first time and not regret it down the road.
In my situation i have a 2004 accord ex with an aftermarket HU and a sub.
I have a panasonic cq-5301u HU avail,
RF p200,2 2ch amp
Kicker kx200.2 2ch amp
6x9 alpine type s
kenwood kac 729s
alpine mrp-m450
12" pioneer ts-w306c
As you can see my stuff is pretty old and outdated. So I want to re build my system for this xmas break.
My plan ... Keep the alpine 6x9 for the rear stage since its not really relevent to the drive when hearing stuff from behind.
But I want a decent set of components up front and properly powered.
So I am getting a 6.5" component set up front... my current choices are;
http://www......com/item_...e+SPR-17S.html
or
http://www......com/item_...r+T1652-S.html
Which is the alpine type r SPr17s
or
RF power T1652S
(or anything on that site around that price range)
Okay so that gets my components covered!
Now time for amps ...
Either I use my current amps and power my speakers or should i get a 4ch amp? 4ch amp would really jack my price up for a decent one, so my other option is this 4ch RF Prime p300-4
http://www......com/item_19566_Rockford+Fosgate+PRIME+R300-4.html
but the thing is that hte PRIME models are a bit more lower end than my 2ch PUNCH line. Should I just keep my punch one for my front components ? and my kickers for the rear? Or should I get a different 2ch amp and power the components to their full potential ? Too many decisions :(
And one last thing, my HU is pretty old, I wouldnt mind updating it, but im a bit out of the loop for car audio.
Is there any SINGLE DIN HU you would recommend or a specific brand?
What brands are on the higher end now? Any suggestions are welcomed :)
Thanks in advance guys
66sportfury 
Copper - Posts: 81
Copper spacespace
Joined: August 04, 2010
Location: Idaho, United States
Posted: November 14, 2010 at 3:24 AM / IP Logged  

check out cresendo audio,  they have a 4 channel amp 125X4 for under  $250 true power

and comp sets for $99 bucks,

http://www.crescendoaudio.com/home.php?cat=249

ac delco am radio and sparkomatic 40 watt sound exploder
mcintosh-asylum 
Member - Posts: 21
Member spacespace
Joined: November 17, 2010
Location: Indiana, United States
Posted: November 18, 2010 at 9:02 AM / IP Logged  
rockford is good but dont have good efficience try soundstream look at their reference multichannels or rubicon multi channels as for components try their tarantula series their cheep.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer