2010 mazda 3

I was asked to put a remote start in this car. It DOES NOT have the push button start. I need a module to interface with the immobilizer and door locks. The best one I've seen is the Xpresskit "DB-ALL" http://www.xpresskit.com/product.aspx?productid=461

Easy install or is it a more difficult car to do?

DEI is about the only company making combo bypass ( Door Lock & Immobilizer ) units for this car.  There is quite a price premium for the unit considering that the door locks are a basic one wire system that would typically only require 2 relays and one resistor.  The BCM, above the Driver Kick Panel, has most of the wires necessary for the install and the ignition & immobilizer wires are in the steering column.Soldering is fun!

i would go with the xk05 and just relay the door locks its about half the price and simple install

You can also use the arm and disarm wires (-) pulse on both and it will work the locks with out relays These wires are there even when no alarm is present"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd

all run around in a darkened room munching pills and listening to repetitive

music."-Kristian Wilson, Nintendo Inc.