the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

09 jetta, remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
mustyk@att.net 
Copper - Posts: 132
Copper spacespace
Joined: November 25, 2009
Location: Michigan, United States
Posted: December 10, 2010 at 7:09 AM / IP Logged  
Has anybody done a 2009 VW Jetta TDI diesal remote start? I can't find any immobiliser bypass or wiring diags for it. Can it even be done? I got an anxious customer!!
thetopinstaller
icearrow6 
Copper - Posts: 497
Copper spacespace
Joined: February 02, 2009
Location: California, United States
Posted: December 10, 2010 at 12:09 PM / IP Logged  
This vehicle is CANBUS data.
Here is the bulldog wiring, but it doesn't specify if this wiring applies for diesel.
08-09 Jetta
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 10, 2010 at 4:59 PM / IP Logged  
Diesel will both the same.
Both Fortin and idatalink do modules for this vehicle giving you immobiliser by-pass AND vehicle functions such as lock/unlock door etc. triggers, lights et al.
mustyk@att.net 
Copper - Posts: 132
Copper spacespace
Joined: November 25, 2009
Location: Michigan, United States
Posted: December 10, 2010 at 7:49 PM / IP Logged  
To: Howie II     Went to IDATAlink website AND Fortin and both DO NOT show any immobiliser bypasses, ONLY can-bus adapters(for lock, unlock, disarm etc.) If you see something I don't please give me a part# and firmware if avail
thetopinstaller
prdjr165 
Copper - Posts: 293
Copper spacespace
Joined: October 31, 2002
Location: Illinois, United States
Posted: December 10, 2010 at 9:25 PM / IP Logged  
I recently did a 2010 jetta and used a can-sl2 and a key with a relay.I didn't find any modules that did the immobiliser bypass.
mustyk@att.net 
Copper - Posts: 132
Copper spacespace
Joined: November 25, 2009
Location: Michigan, United States
Posted: December 20, 2010 at 6:37 PM / IP Logged  
Thanks icearrow6!! I didn't think Bulldog wiring could be so ON POINT! The only thing I had problems with was the tach signal at the injector. my unit, Omega RS-210EDP didn't seem to like that signal at all, it wouldn't learn. Still looking for another tach signal, perhaps maybe fron the tachometer??
thetopinstaller
xscash 
Copper - Posts: 317
Copper spacespace
Joined: March 05, 2006
Location: United States
Posted: December 20, 2010 at 7:00 PM / IP Logged  
the flcan by flash logic will do tach out
expandable sound
south of boston

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer