the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 f150 door locks failure


Post ReplyPost New Topic
< Prev Topic Next Topic >
Pyromed1 
Copper - Posts: 62
Copper spacespace
Joined: January 30, 2005
Location: United States
Posted: December 17, 2010 at 12:05 AM / IP Logged  
The Door locks have stopped working on my 2005 F150 Crew Cab. The only thing that works with the power locks is Drivers door Unlock. I've replaced all 4 actuators and that did nothing. Anyone know what the fix is?
Remote keyless is exactly the same as the drivers button. It only unlocks the drivers door. The passenger button does nothing.
Thanks,
Corey
chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 17, 2010 at 5:32 AM / IP Logged  
Does it have factory keyless or add on ?   I have seen the lock wires break in the kick panel. Where an add on keyless is hooked to.    There is a pink / YELLOW for lock and pink/green for unlock.    If one of those wires break it will cause the locks not to operate properly
If i Can't Install it    I Don't need it   Joe
Pyromed1 
Copper - Posts: 62
Copper spacespace
Joined: January 30, 2005
Location: United States
Posted: December 17, 2010 at 11:16 AM / IP Logged  
Thanks, it's a factory system.
Seems odd that the unlock still works, but only on the drivers door.
I'll check the wires.
Corey
chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 17, 2010 at 4:30 PM / IP Logged  
ok if lock and unock only work on the drivers door    the other doors are on a seperate circuit   the other 3 doors are spliced together then go to the body security module pin 3 in connector C3008A its a 16 pin connector at the BSM which is on the left side on the rear wall of the truck behind the rear seat. the easiest way to check the wiring is at the actuators themselves   did you check the wiring before you changed the actuators ??
The output of the BSM is the pink/orange its the same in all 3 doors i would start there
If i Can't Install it    I Don't need it   Joe
Pyromed1 
Copper - Posts: 62
Copper spacespace
Joined: January 30, 2005
Location: United States
Posted: December 17, 2010 at 4:43 PM / IP Logged  
Cool. I'll check it out. The LOCK does NOT work on any doors. Just the UNLOCK on the drivers door.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer