2008 mustang doorlocks

I am going to install an ungo sr9000 in a 2008 mustang gt. I have found the wiring info for it, and found info that says the door lock wire is WHITE/ purple (type B). unlock is dark blue/light green (type B). My question is what are type B locks? If any one can tell me the best way to wire these locks I would appreciate it. I was hoping the ads-al-ca I'm using for bypass would of taken care of the locks, but it doesn't evidently. Thanks for any input. jmacf14

hi, the locks are negative trigger. if the Ungo has negative lock outputs, they can connect directly to the wires you mentioned..or configure the Ungo for negative door locks and connect. you can access them at the SJB (fuse box) in passenger kick...one nut holds the SJB in place. for more info: https://www.the12volt.com/installbay/forum_posts.asp~TID~87927 mark

Audiovox has the following info for that vehicle.

	Power Unlock		YELLOW/RED		(-)		IN GREEN TAPED HARNESS BEHIND DRIVERS SIDE OF DASH
	PowerLock		WHITE/ VIOLET		(-)		IN GREEN TAPED HARNESS BEHIND DRIVERS SIDE OF DASH

Thanks for the quick responses guys, I appreciate it!jmacf14

dark blue/light green...drivers unlock sw, WHITE/ violet...drivers lock sw, yellow/red...pass unlock sw, ORANGE / black...pass lock sw, light blue/black...disarm, light blue/pink...arm.