2009 aveo, remote starter?

what unit are you using?

The starter is a bulldog rs85p, but I am using the pkuaveo module for bypass. As long as the pkuaveo control is plugged in the car will start( not stay running ) However if I try to remote start the car with the key in the ignition, it will not. I dont think this car has a transponder, if it did wouldn't it start with the key in the ignition? Connections from remote are 12+ to car , Ground to car , yellow/ black  from 12 pin harness of remote to black ground when running of pkuaveo. White ignition wire from remote to orange wire in car are switch, WHITE/ Black acc wire from remote to lt blue acc wire in car. RED / black wire in ign  vdata on car connected to blue wire on Pkuaveo and the white wire from the pkuaveo to the brown referece wire in car ign.red wire pkuaveo 12+

Only other conections are the hood pin switch, the brake switch and the blue wire from the 12 pin harness on remote using a relay to the door lock wire on the car in kick pannel for remote start using factory remote. Oh and the RED / black wire on the remote to the disarm in the kick pannel. I didn't hook up the starter wire from the remote to anything but didn't think I had to since it remote starts without it. I am soooooo lost on this one--lol