the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5701 d2d issue wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
asulli 
Member - Posts: 2
Member spacespace
Joined: December 26, 2010
Posted: January 01, 2011 at 12:48 AM / IP Logged  

Vehicle  = 2004 Jeep Liberty

Alarm/Remote Start = Viper 5701

Bypass unit = XpressKit / Omega CHDL4P

Admittedly I screwed up on the initial installation and tried to wire the Viper and the Bypass in parallel (instruction book did not help from either part). However I have the vehicle working with one exception, The Bypass is not sending the disarm signal out.

I have figured out my mistake as being the Bypass unit should be hooked up to the D2D connector of the Viper.

Problem: The Bypass unit has 5-pin connector and the Viper has a 4 pin connector

Question: Which wire goes to which pin on the Viper Unit (I can wire up a 4 pin harness if I know the viper pin coding. The Bypass has Red (12v), Black (Ground), and Brown (Data) and then 2 open pins.

Please help I have searched the Net for days with no luck beyond peoples comments that the wires have to be connected.

tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 01, 2011 at 10:01 AM / IP Logged  
d2d are all 4pin connectors...have not ever seen a 5pin.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
asulli 
Member - Posts: 2
Member spacespace
Joined: December 26, 2010
Posted: January 01, 2011 at 6:18 PM / IP Logged  

 The Omega CHDL4P has a 5 pin connector that plugs into the D2D as a one way TX line. So the Viper can tell the Bypass unit to do certain functions.

I solved the problem. The TX wire is the 3rd wire off the viper D2D connection. So it looks like this: 12v, Ground, TX, and  ?  (Would assume RX). I cut one end of the 5-pin plug down to turn it into a 4 pin plug.

The Viper now works to remote start the Jeep.

 

thanks for all the posting on the forum, they helped.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer