oem ford not functioning

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / oem ford not functioning (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

little fish

Member - Posts: 2

Joined: January 09, 2011

Location: Alberta, Canada

Posted: January 09, 2011 at 11:43 PM / IP Logged

I just got a 06 F150 FX4, it had an aftermarket unit install that was crap and installed poorly. I had access to a AVIC-XD1 form a 07 edge I tried to install with the Facory wiring, all the connections seem the same and fit perfectly. It powers up, I hear the CD tray moving, the FORD logo come on the screen then....nothing operatesbut the CD load and eject.

Since that didn't work I re-installed the Original 6cd/mp3 premium system, I get the same result. Power, cd tray moves then..nothing. What could be causing this problem. Could it be a ground issue.

There are 3 connections, 24 pin, 16 pin, and 8 pin. What should I try?

Newbie

Back to Top

resquchas

Copper - Posts: 93

Joined: April 15, 2010

Location: Virginia, United States

Posted: January 11, 2011 at 12:42 PM / IP Logged

If it had a "crappy" install that you removed then you can not really be sure what happened at the time of that install. You may need to do some detective work to find out what wires may or may not be compromised using a DMM

The RIGHT way is the ONLY way.

Back to Top

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: January 11, 2011 at 5:52 PM / IP Logged

Your ACC wire is not out-putting any voltage. Check the fuses.

Back to Top

resquchas

Copper - Posts: 93

Joined: April 15, 2010

Location: Virginia, United States

Posted: January 11, 2011 at 8:19 PM / IP Logged

No ACC wire sounds good to me. The way it is acting is though it is not getting the message that it should be ON.

The RIGHT way is the ONLY way.

Back to Top

little fish

Member - Posts: 2

Joined: January 09, 2011

Location: Alberta, Canada

Posted: January 11, 2011 at 11:20 PM / IP Logged

I checked the fuses when I installed. Turns out someone pulled a fuse and didn't put a new one in. Hard to tell at first glance. I had to check with the owners manual all the fuses and locations. Everything is working fine now.

Thanks for the help!

Newbie

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

oem ford not functioning

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.