problem after using bitwriter

Home / the12volt's Install Bay / Car Security and Convenience / problem after using bitwriter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

installerman23

Copper - Posts: 53

Joined: July 08, 2006

Location: United States

Posted: January 12, 2011 at 12:49 PM / IP Logged

A friend of mine installed a clifford 1x on a 2010 Dodge Ram Turbo Diesel and it was fine.A few weeks later he reprogramed the remotes and locked out the other channels and now the check engine light keeps popping up with a po934 code,hydraulic pressure sensor low input.Anybody ever experienced anything like this??

installing, one day at a time..

Back to Top

Search for other posts by installerman23

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 12, 2011 at 4:14 PM / IP Logged

i dont think that would be the unit causing the problem. are you powering up all ignition and acc wires?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

installerman23

Copper - Posts: 53

Joined: July 08, 2006

Location: United States

Posted: January 12, 2011 at 4:39 PM / IP Logged

It's just a basic alarm,not remote start.

installing, one day at a time..

Back to Top

installerman23

Copper - Posts: 53

Joined: July 08, 2006

Location: United States

Posted: January 12, 2011 at 4:42 PM / IP Logged

The customer is also saying the alarm is disarming byitself.never had a problem with a dei alarm system so I'm not sure what's going on

installing, one day at a time..

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 12, 2011 at 4:50 PM / IP Logged

Coincidental, try and run a diagnostic, NOT at a stealership.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 12, 2011 at 4:52 PM / IP Logged

Also erase and reprogramme the remotes. Bet the customer keeps a remote in his/her pocket, pressure on the pocket could turn off the alarm.

Back to Top

installerman23

Copper - Posts: 53

Joined: July 08, 2006

Location: United States

Posted: January 12, 2011 at 5:17 PM / IP Logged

Yeah that's why the customer came back,to reprogram the remotes and lock out the other channels.I was hoping someone had more info on that code too,po934.I can't find anything online,just a guy who did a engine rebuild and got the same code which he thought might be a vacuum issue.Thanks for the replys !!

installing, one day at a time..

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem after using bitwriter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.