the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

problem after using bitwriter


Post ReplyPost New Topic
< Prev Topic Next Topic >
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 12, 2011 at 12:49 PM / IP Logged  
A friend of mine installed a clifford 1x on a 2010 Dodge Ram Turbo Diesel and it was fine.A few weeks later he reprogramed the remotes and locked out the other channels and now the check engine light keeps popping up with a po934 code,hydraulic pressure sensor low input.Anybody ever experienced anything like this??
installing, one day at a time..
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 12, 2011 at 4:14 PM / IP Logged  
i dont think that would be the unit causing the problem. are you powering up all ignition and acc wires?
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 12, 2011 at 4:39 PM / IP Logged  
It's just a basic alarm,not remote start.
installing, one day at a time..
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 12, 2011 at 4:42 PM / IP Logged  
The customer is also saying the alarm is disarming byitself.never had a problem with a dei alarm system so I'm not sure what's going on
installing, one day at a time..
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 12, 2011 at 4:50 PM / IP Logged  
Coincidental, try and run a diagnostic, NOT at a stealership.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 12, 2011 at 4:52 PM / IP Logged  
Also erase and reprogramme the remotes. Bet the customer keeps a remote in his/her pocket, pressure on the pocket could turn off the alarm.
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 12, 2011 at 5:17 PM / IP Logged  
Yeah that's why the customer came back,to reprogram the remotes and lock out the other channels.I was hoping someone had more info on that code too,po934.I can't find anything online,just a guy who did a engine rebuild and got the same code which he thought might be a vacuum issue.Thanks for the replys !!
installing, one day at a time..

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, August 16, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer