hid goes out after 30 sec on high beams

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / hid goes out after 30 sec on high beams (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Cbr629

Copper - Posts: 79

Joined: March 18, 2002

Location: Maryland, United States

Posted: February 06, 2011 at 8:10 AM / IP Logged

I have a 2008 BMW k1200s motorcycle with a motorcycle kit from Pirates Lair,the high beams come on and goes out after 30 second and throw a lamp fault on my computer.I used a warning canceler relay and still the same problem.If I plug in a standard bulb on one side the high beams works fine.How can I get the resistance of the standard bulb to go inline with the HID kit? Thanks in advance hid goes out after 30 sec on high beams - Last Post -- posted image.

hid goes out after 30 sec on high beams - Last Post -- posted image.

thanks

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 06, 2011 at 12:30 PM / IP Logged

You need a resistor inline of the OEM wire harness and also if you still get the flicker or lamp goes out completely, you will need a capacitor.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hid goes out after 30 sec on high beams

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.