the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper remote no comm after dead battery


Post ReplyPost New Topic
< Prev Topic Next Topic >
hilock 
Member - Posts: 36
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 18, 2010
Location: California, United States
Posted: February 14, 2011 at 5:17 AM / IP Logged  
I'm working with my 2005 Infiniti G35 Coupe a Viper 5301 remote start and keyless entry is installed and working great for several months.
After about a month of a dead battery the remote won't talk to the brain (shipped my car here to S. Korea). I installed the system myself (with the help of this site) and all had been working great for months prior to the shipment.
I tried re pairing the remote, but after holding down the "F" button for the required 10-12 seconds nothing happens (including the 3 sec notification does not come on).
I was able to get the remote to work just fine a couple of times by pressing the brain button a few times randomly also I did get the pairing sequence to work once but the amber F light stayed on. However each time I got it working, a few minutes later I was back to square one........meaning nothing happens but the error beep when I push the remote buttons.
This is probably something simple, I really appreciate any advice.
Thanks
G-35 & FJ Cruiser Remote Start Viper 5301 & Pyton 4203--Alpine touchscreen A/V system w/Camera, Sat radio, SWI
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: February 14, 2011 at 5:48 AM / IP Logged  
Try unplugging the antenna and replugging it in after a minute.
Installer, IT support, and FFL. I need less hobbies.
hilock 
Member - Posts: 36
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 18, 2010
Location: California, United States
Posted: February 14, 2011 at 6:58 AM / IP Logged  
thanks for the tip, no luck so far.
Anyone other tips?
In my most recent attempt, I had to fuss with "program/valet switch" which stayed a solid blue. I also noticed that lock/unlock, while they worked I also got an error buzz. Was not long before the remote stopped controlling the locks though.
G-35 & FJ Cruiser Remote Start Viper 5301 & Pyton 4203--Alpine touchscreen A/V system w/Camera, Sat radio, SWI
blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: February 14, 2011 at 7:56 PM / IP Logged  
have you check all the +12V inputs on the brain to make sure you're getting power everywhere you should. Have seen fuses blow while jumpstarting. Though its a rare occurence its happened a few times. I'd also try unplugging the brain entirely and plug it back in

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, January 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer