the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

clifford 50.7x and 2008 tacoma


Post ReplyPost New Topic
< Prev Topic Next Topic >
craniumvibratio 
Copper - Posts: 55
Copper spacespace
Joined: October 02, 2004
Location: United States
Posted: February 16, 2011 at 11:54 PM / IP Logged  
Hey everyone, Its been a while sense I've posted about anything. I'm installing a Clifford 50.7x in my 2008 Tacoma Pre Runner V6. (hope that covers everything)    I know the truck has two ignitions an two starters. The alarm is capable of controlling both ignitions and one starter with the Primary harness and with the secondary harness using a relay. Or vise versa. My question is what do you think is best to use the Primary harness with? the ignition or the starter? I Currently have the ignition connected and the relay pushing the second starter but when I turn my key I get THE GRIND. I hope that makes sense. Let me know if you want any more info. I will post the links to the truck wiring diagram and the manual below. Thanks in advance!
Alarm
https://www.the12volt.com/installbay/downloads.asp?srch=all&term=50.7x
Truck
https://www.the12volt.com/installbay/forum_posts.asp~TID~99263
KPierson 
Platinum - Posts: 3,526
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: February 17, 2011 at 9:07 AM / IP Logged  
It theoretically doesn't matter. If you get a crank when the car is remote started you need to make sure your starter kill is connected to the wire that actually makes the vehicle crank. In my experience if a car has two starter wires only one will actually crank the starter. The remote start uses the starter kill relay to prevent the starter from cranking.
Does the starter kill feature work at all?
Kevin Pierson
craniumvibratio 
Copper - Posts: 55
Copper spacespace
Joined: October 02, 2004
Location: United States
Posted: February 20, 2011 at 2:18 PM / IP Logged  
Hey, Thanks for the info. You set me in the right path. It turns out hat I had the first and secondary starters reversed. There are two diagrams on the site and they both contradict themselves. ( well the starter part ) I got it taken care of and really appreciate the help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 13, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer