the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 pontiac bonneville ssei audio


Post ReplyPost New Topic
< Prev Topic Next Topic >
nlguy60 
Member - Posts: 2
Member spacespace
Joined: March 02, 2011
Location: Iowa, United States
Posted: March 02, 2011 at 7:17 PM / IP Logged  
Hello, I am looking for a wiring diagram for the complete audio system for a 2002 Pontiac Bonneville SSEi that has a monsoon sound system. This system may also be the same system used in the 2003 Bonneville SSEi.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 02, 2011 at 8:24 PM / IP Logged  
This is a LOCK & DOCK type head unit. There are no wires at the back of the deck ( it's a ribbon cable). You can get a PAC, Scosche or a Metra harness for it to replace the OEM head unit. The PAC C2R-GM32R is most likely the right one to use since it's designed for the amplified system.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
nlguy60 
Member - Posts: 2
Member spacespace
Joined: March 02, 2011
Location: Iowa, United States
Posted: March 03, 2011 at 11:14 AM / IP Logged  
I was actually just looking for which color the wires are for the audio input from the headunit to the amplifier, and also which wire is the remote turn on. Reason being, I'd like to just add an amplifier by crimping onto the wires that go into the amp, and onto one of the speaker's wires so I could add a line output converter. There should be no need to go all the way to one of the door speakers just to get a signal when the wires go directly form the amp to the speaker.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 2, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer