honda s2000 compustar 2w8000fmasf

Power the camera from the reverse/back-up light, then will only be on for a few seconds at at a time and the problem won't arise. Nothing at all wrong with your siren position; it's a good example of "thinking outside of the box".

Thanks Howie, Im planning on buying the dei proximity sensor, Where would you suggest I mount it? Could not have done anything without HOWIE II.

If the hard top is to be permanent, there, other wise centre console, somehow.

hey mike, any plans on writing up a DIY for other fellow s2kers from everything you've learned? ;)

Hey Howie I just realized I only wired up the driver door unlock motor, Could I wire in the passenger wires to the same relay. For example for both door unlock motor to one relay. Thanks!Could not have done anything without HOWIE II.

Hey, Im more then willing to help answer basic questions. I will not be making a diy as doing so will enable more people to understand how our cars work and help unexperiance thefs. You can find me on s2ki user name s2000_vtec_mike. The install at first is daunting but it is doable all the information you need is either in this thread or other threads. I also suggest you take it to a reputable installer. Because if you wire one thing wrong it could jeopardize many components of the car. In the end coasting you more then the $100-$400 install fee.Could not have done anything without HOWIE II.

Actually im going to wire the passenger side door motor to its own relay. Will the 15amp fuse i used for the driver Motor lock/unlock be enough for three relays ? Or should I change the fuse to 20amp.Could not have done anything without HOWIE II.

The 15 amp fuse is fine, it's not three relays, it's the two motors!

Yes two motors. Today I tried to set up three relays two for the door lock motors (Left pink-black) and (Right pink-blue) and one for LOCK. It did not work, So im going to go back and wire it up how i had the two relays before(Unlock pink-black) (LOCK yellow-Black). I am extremely tired I doubt what I wrote down made any sense. I will chime in tomorrow. Anyways thanks Howie good night/ good morning at your time zone haha.Could not have done anything without HOWIE II.

Without going into the wiring diagrams 'cause it's morning and I feel lazy, I think you've pulled the motor wires for the driver's door only.