wiring crossover?

Home / the12volt's Install Bay / Car Audio / wiring crossover? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

equalizir

Copper - Posts: 71

Joined: February 28, 2003

Location: United States

Posted: April 24, 2003 at 9:16 AM / IP Logged

hey guys,i was wondering if i could connect my audiocontrol crossover power wire to the power antenna wire on my head unit?

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: April 24, 2003 at 10:13 AM / IP Logged

Check to see if the antenna trigger wire maintains a constant 12 volt current. With the head unit on cd mode. If it dose than yes you can use it as a turn on wire. You cannot use it as the constant (main power wire). You can tap into the power on your amp if you need a constant for the X-over.

equalizir

Copper - Posts: 71

Joined: February 28, 2003

Location: United States

Posted: April 24, 2003 at 6:05 PM / IP Logged

ok,ill just use the amp for the constant power.but ofcourse ill need to put a fuse on the power line for the crossover.what size fuse should i use for the crossover power line?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring crossover?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.