the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 Dodge Sprinter Alarm/Remote Start, Stereo Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
emorse2323 
Copper - Posts: 106
Copper spacespace
Joined: January 01, 2003
Location: United States
Posted: April 14, 2011 at 11:00 AM / IP Logged  
I need the wiring to put in an alarm for a 2008 dodge sprinter
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: April 14, 2011 at 6:07 PM / IP Logged  
Audiovox Lists:
     
          #513961: 2008 DODGE SPRINTER VAN WITH 3.0L TD ENGINE AND STANDARD AUDIO SYSTEM
     Audio/Mobile Video                                        
     WIRE          COLOR          POLARITY          LOCATION     
     Battery          RED / BLACK          (+)          RADIO HARNESS     
     Accesory          BROWN & BROWN / RED          (DATA)          RADIO HARNESS     
               THIS VEHICLE USES THE CAN DATA SYSTEM FOR ACCESSORY TURN ON     
     Ground          BROWN          (-)          RADIO HARNESS     
     Illumination          BROWN & BROWN / RED          (DATA)          RADIO HARNESS     
     Power Antenna          YELLOW/BLACK          (+)          RADIO HARNESS     
     LF Speaker (+)          BROWN / VIOLET     
               THESE WIRES ALSO GO TO THE CENTER CHANNEL SPEAKER IF EQUIPPED     
     LF Speaker (-)          BROWN / DARK GREEN     
     RF Speaker (+)          BROWN / ORANGE     
               THESE WIRES ALSO GO TO THE CENTER CHANNEL SPEAKER IF EQUIPPED     
     RF Speaker (-)          BROWN / DARK BLUE     
     LR Speaker (+)          BROWN / RED     
     LR Speaker (-)          BROWN / WHITE     
     RR Speaker (+)          BROWN / PINK     
     RR Speaker (-)          BROWN / GRAY     
     Steering Cntrls          NO     
     Speed Cntrl          YES     
     Radio Security          YES     
     Security                                        
     WIRE          COLOR          POLARITY          LOCATION     
     Battery          RED / GRAY          (+)          IGNITION SWITCH HARNESS     
     Ignition 1          BLACK          (+)          IGNITION SWITCH HARNESS     
     Starter 1          VIOLET          (+)          AT VEHICLE FUSE BOX     
               NOT FOR REMOTE START, VEHICLE USES CAN DATA FOR STARTING     
     All Door Trigger               
               USE INDIVIDUAL DOOR TRIGGERS AND DIODE ISOLATE EACH WIRE OR USE DOMELIGHT SUPERVISION     
     Domelight Super          BROWN / DARK GREEN          (-)          AT BODY CONTROL MODULE     
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICKPANEL UNDER DASH     
     LF Latch          DARK BLUE/DARK GREEN          (-)          AT DRIVER DOOR MODULE IN DRIVERS DOOR     
     RF Latch          DARK BLUE/DARK GREEN          (-)          AT BODY CONTROL MODULE      
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICK PANEL UNDER DASH     
     LR Latch          YELLOW/WHITE          (-)          AT BODY CONTROL MODULE     
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICK PANEL UNDER DASH     
     RR Latch          PINK/WHITE          (-)          AT BODY CONTROL MODULE     
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICK PANEL UNDER DASH     
     Trunk Trigger          DARK BLUE/DARK GREEN          (-)          AT BODY CONTROL MODULE     
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICKPANEL UNDER DASH     
     Hood Trigger          BROWN / PINK          (-)          AT BODY CONTROL MODULE     
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICKPANEL UNDER DASH     
     Parking Lights          GRAY/BLACK & GRAY/RED          (+)          AT BODY CONTROL MODULE     
               THESE WIRES MUST BE DIODE ISOLATED.     
     Convenience                                        
     WIRE          COLOR          POLARITY          LOCATION     
     Headlights-Lo               
               THESE WIRES MUST BE DIODE ISOLATED.     
     LF Pk Lt Bulb          GRAY/BLACK          (+)          AT FRONT LEFT PARKING LIGHT     
     RF Pk Lt Bulb          GRAY/RED          (+)          AT FRONT RIGHT PARKING LIGHT     
     LR Pk Lt Bulb          GRAY/BLACK          (+)          AT REAR LEFT PARKING LIGHT     
     RR Pk Lt Bulb          GRAY/RED          (+)          AT REAR RIGHT PARKING LIGHT     
     All Hazrd Lights          BLACK/ WHITE & BLACK/ ORANGE          (+)          AT VEHICLE HAZARD LIGHT SWITCH     
               THESE WIRES MUST BE DIODE ISOLATED.     
     LF Hazrd Bulb          BLACK/ WHITE          (+)          AT FRONT LEFT DIRECTIONAL LIGHT     
     RF Hazrd Bulb          BLACK/ ORANGE          (+)          AT FRONT RIGHT DIRECTIONAL LIGHT     
     LR Hazrd Bulb          BLACK/ WHITE          (+)          AT REAR LEFT DIRECTIONAL LIGHT     
     RR Hazrd Bulb          BLACK/ ORANGE          (+)          AT REAR RIGHT DIRECTIONAL LIGHT     
     Parking Brake          BROWN / WHITE          (-)          AT BODY CONTROL MODULE     
     Remote Start                                        
     WIRE          COLOR          POLARITY          LOCATION     
     Battery          RED / GRAY          (+)          IGNITION SWITCH HARNESS     
     Ignition 1          BLACK          (+)          IGNITION SWITCH HARNESS     
     Ignition 2          BLACK/ ORANGE          (+)          IGNITION SWITCH HARNESS     
     Ignition 3          BLACK / YELLOW          (+)          IGNITION SWITCH HARNESS     
     Starter 1          VIOLET          (+)          AT VEHICLE FUSE BOX     
               NOT FOR REMOTE START, VEHICLE USES CAN DATA FOR STARTING     
     Anti-Theft Type          UNIVERSAL IMMOBILIZER     
     Anti-Theft Descript          THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER     
     Key Sense          WHITE/ RED          (+)          IGNITION SWITCH HARNESS     
     Speed Sense          WHITE          (AC)          AT VEHICLE INSTRUMENT CLUSTER     
     Parking Lights          GRAY/BLACK & GRAY/RED          (+)          AT BODY CONTROL MODULE     
               THESE WIRES MUST BE DIODE ISOLATED.     
     Brake Lights          BLACK/ RED          (+)          AT SWITCH ABOVE PEDAL     
     Reverse Lights          WHITE/ DARK BLUE          (-)          AT BODY CONTROL MODULE     
               BODY CONTROL MODULE IS LOCATED IN DRIVER KICK PANEL UNDER DASH     
     Horn          DARK GREEN          (+)          AT VEHICLE FUSE BOX     
     Modules                                        
     WIRE          LOCATION                         
     Please select another category
     Doorlocks/Windows                                        
     WIRE          COLOR          POLARITY          LOCATION     
     Power Unlock          DARK BLUE/BLACK          (REV)          AT BODY CONTROL MODULE     
               THESE ARE THE REAR AND SIDE DOOR MOTOR WIRES, YOU MUST USE ALL MOTOR WIRES AND USE REVERSE POLARITY FOR LOCK/UNLOCK     
     PowerLock          DARK BLUE/BROWN          (REV)          AT BODY CONTROL MODULE     
               THESE ARE THE REAR AND SIDE DOOR MOTOR WIRES, YOU MUST USE ALL MOTOR WIRES AND USE REVERSE POLARITY FOR LOCK/UNLOCK     
     Driver Mtr Unlock          DARK BLUE/RED          (REV)          AT DRIVER DOOR MODULE INSIDE DRIVER DOOR     
     Driver Mtr Lock          DARK BLUE/BLACK          (REV)          AT DRIVER DOOR MODULE INSIDE DRIVER DOOR     
     Pas Mtr Unlock          DARK BLUE/RED          (REV)          AT BODY CONTROL MODULE     
     Pas Mtr Lock          DARK BLUE/BLACK          (REV)          AT BODY CONTROL MODULE     
           
     Note: Audiovox makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Audiovox disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.      
           
Installer, IT support, and FFL. I need less hobbies.
emorse2323 
Copper - Posts: 106
Copper spacespace
Joined: January 01, 2003
Location: United States
Posted: April 15, 2011 at 7:59 AM / IP Logged  
Thank you
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: May 21, 2011 at 9:57 PM / IP Logged  
sounds like a challenge!!!! good luck.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, November 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer