5902 remote start 97 expedition

when i use remote start, the starter will not disengage but the motor is on and running .i can start it with key ,hit the button on remote ,take the key out of ignition the motor stays on without problems.prior to this ,the remote start worked fine when i connected everything temporary for a test run.i notice this happen after i made a change in my menu 3: item:11_status 2 output changed it to opt 2 for defogger option and that when the problem occurred . wanted to keep virtual tach .list of things i have tried :MENU 3 cranking time 0.6sec then to 0.8sec no change ,engine checking mode_ virtual tach ,no change .. anyone have a clue and what is status 2 output H2/16 used for other than defogger(when switched over in menu 3:11)