1985 lincoln town car stereo

Home / the12volt's Install Bay / Car Audio / 1985 lincoln town car stereo (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

joelincoln

Member - Posts: 3

Joined: May 13, 2011

Location: Arkansas, United States

Posted: May 13, 2011 at 6:16 AM / IP Logged

i tried installing a alpine cde-102 in my 85 town car and it reads dc error. this car uses a common ground what can i do to get this working? i removed the stereo and hooked it up in another car and it plays fine. please help

if its too loud you must be too old

Back to Top

ac0j

Copper - Posts: 121

Joined: January 27, 2006

Location: United States

Posted: May 13, 2011 at 6:17 PM / IP Logged

Best solution is to run new speaker wire to each speaker.

Back to Top

joelincoln

Member - Posts: 3

Joined: May 13, 2011

Location: Arkansas, United States

Posted: May 14, 2011 at 6:27 AM / IP Logged

thats what i have decided to do change out all factory speakers and run all new wiring

if its too loud you must be too old

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1985 lincoln town car stereo

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.