the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

l port and plexiglass


Post ReplyPost New Topic
< Prev Topic Next Topic >
slab4ever 
Member - Posts: 1
Member spacespace
Joined: June 15, 2011
Location: Texas, United States
Posted: June 15, 2011 at 3:17 PM / IP Logged  
i need a port length of 20 inches i was wondering if this is the right way to do it? the back port piece is 3 1/4. Next question i want to put like maybe a 14x14 plexiglass section not the whole top piece just a cut out. would 3/4 work or would i need to go 1 inch i dont want it to flex!
l port and plexiglass - Last Post -- posted image.
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 12, 2012 at 3:10 PM / IP Logged  
the port is correct and you can do the plexi but you would need to rabbit the mdf so the plexi mounts on the box and doesnt look bad but id use 1" plexi.
bp
z03mz03m 
Copper - Posts: 244
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 09, 2010
Location: Delaware, United States
Posted: October 26, 2012 at 10:51 AM / IP Logged  
I wouldnt use plexiglass. Use Polycarbonate. It machines much better without the risk of cracking like plexi especially when drilling holes.
Dodge Magnum in progress:
Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer