the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

port volume


Post ReplyPost New Topic
< Prev Topic Next Topic >
jphill68 
Member - Posts: 1
Member spacespace
Joined: July 24, 2011
Location: Tennessee, United States
Posted: July 25, 2011 at 4:14 AM / IP Logged  
If I have two subs that are in one chamber and share one port, should that port be twice the volume as recommended by the manufacturer? Or, should be the same volume as the manufacturer recommends for a single sub?
toy civic 
Member - Posts: 9
Member spacespace
Joined: October 19, 2011
Location: California, United States
Posted: December 06, 2011 at 9:36 PM / IP Logged  

With two subs, volume is not the issue as much as the port surface area.

The port surface area must be 25% of the total surface area of the subwoofer(s). This is to prevent port noise and acheive the prope vent mach number.

Once surface area is calculated, then calculate the port volume based off of internal box volume..


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, December 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer