2006 totyota sienna, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 totyota sienna, remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 02, 2011 at 7:48 PM / IP Logged

Did you see a keysense wire listed in the wiring data? If so, did you connect it?

Hung416

Member - Posts: 9

Joined: November 26, 2003

Location: Ontario, Canada

Posted: October 02, 2011 at 8:31 PM / IP Logged

key override sl2

PURPLE / white rx data in ----->yellow wire

yellow/black tx data out------>yellow/red

blue--------------->(-) status out remote starter

green key sense blue/white

all black connect i was hook to compustar module is it right! thanks for you help!

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: October 03, 2011 at 6:56 AM / IP Logged

You probably have the wrong Ignition 2 wire, or maybe you powered it as accessory instead of ignition by accident.

Does the heater/air conditioner work during remote start?

Hung416

Member - Posts: 9

Joined: November 26, 2003

Location: Ontario, Canada

Posted: October 09, 2011 at 4:50 PM / IP Logged

toyota sienna 06, have the problem the airbag light come on the dash, after done all the wiring start with remote start, only the key start was no problem

Hung416

Member - Posts: 9

Joined: November 26, 2003

Location: Ontario, Canada

Posted: October 09, 2011 at 10:51 PM / IP Logged

toyota sienna 06, wiring problem after i done the remote starter the airbag on the dash was on, if i start the car with the key without

remote starter no airbag light thanks for your help

Hung416

Member - Posts: 9

Joined: November 26, 2003

Location: Ontario, Canada

Posted: October 12, 2011 at 7:02 PM / IP Logged

toyota sienna 2006, i want to put remote starter but the wiring diagram they have 2 wiring same color, BLACK / YELLOW, one for starter, another for ignition. How can i test!

kreg357

Platinum - Posts: 7,789

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: October 12, 2011 at 7:36 PM / IP Logged

Use a Digital Multi Meter. Set to 20V DC. Connect the Black lead to chassis ground.

Starter Wire : Connect the DMM Red lead to the suspect wire. This wire has +12 volts when the ignition switch is turned to the

“START” (CRANK) position only. This wire has 0 volts in all other ignition switch positions.

Ignition wire : Connect the DMM Red lead to the suspect wire. The ignition wire should receive +12 volts when the ignition key

is in the “ON” or “RUN” and “START” or “CRANK” position. When the ignition is turned “OFF”, the ignition wire should receive “0” voltage.

Accessory wire : Connect the DMM Red lead to the suspect wire. An accessory wire will show + 12 volts when the ignition switch is turned

to the “ACCESSORY” or “ON” and “RUN” positions, and will show 0 Volts when the key is turned to the “OFF” and “START” or “CRANK” position.

Soldering is fun!

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 totyota sienna, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.