need rs 2009 mini cooper

need a remote start wiring diagram for a 2009 mini cooper clubman with push to start. I am using a DLPK and an KIBMW modules which i have ordered. putting in an avital 4113 Remote start. hoping to have fun with my first PTS, let me also know if the clubman is different than the regular cooper. thank you guys

     Ignition 1          RIBBON HARNESS          (-)          AT VEHICLE START/STOP BUTTON                 Starter 1          WHITE          (+)           AT CAR ACCESS SYSTEM MODULE UNDER DRIVER DASH ABOVE STEERING COLUMN          *Not for Remote Start      Anti-Theft Type          BMW EWS® VEHICLE IMMOBILIZER                Anti-Theft Descript          THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER                Speed Sense          BROWN          (AC)          AT ABS CONTROL MODULE BETWEEN LEFT FRONT STRUT TOWER AND FIREWALL                 Parking Lights          USE INDIVIDUAL PARKING LIGHT WIRES AND DIODE ISOLATE EACH WIRE OR USE HAZARDS                Brake Lights          BLUE/RED          (+)          AT SWITCH ABOVE BRAKE PDEAL ALSO AT FOOTWELL MODULE IN DRIVER KICKPANEL                Reverse Lights          BLUE/GRAY          (+)          AT FOOTWELL MODULE IN DRIVER KICKPANEL                Horn          BROWN / YELLOW          (-)           AT MODULE IN PASSENGER KICKPANEL ALSO RED / BLUE (+)                      

From your point of view no, tach not mentioned above, should be black wire to OBD (data) socket.